Jetter JM-208-480-OEM, User Manual, Page: 55 / 128

JetMove 208-480 7.3 Resolver Connection
Jetter AG 55
7.3 Resolver Connection
7.3.1 Specifications
Specification of Mating Connector for X61
• 9-pin SUB-D male connector
• Metallised enclosure
Specification of Resolver Cable
• Cable size: 4 * 2 * 0.14 mm² (AWG 26(8)) min.
• Cores have to be shielded and twisted in pairs and must be included in an overall
shielding.
• Shielding has to be connected to the connector housings on both sides.
• Material: Copper
• Temperature class: 60 °C
• Maximum cable length: 50 m
7.3.2 Resolver Cable with Mating Connector
Mating connector of the resolver (solder side)
Fig.: 12: RC series mating connector of the resolver (internal thread M23)
Notice!
The resolver respectively HIPERFACE mating connector of the Jetter motor
types JL, JK and JH can be ordered from Jetter AG by supplying the following
particulars:
Item no. 15100069 Resolver / HIPERFACE
The complete resolver cable connecting the servo amplifier series JetMove 2xx,
and the Jetter motor types JL, JK and JH can be ordered from Jetter AG by
supplying the following cable assy number and specifications:
Cable assy no. 23 for the servo amplifier series JetMove 2xx
Solder
Side
12
9
11
5
7
8
6
4
10 2
1
3