Jetter JM-208-480-OEM, User Manual, Page: 11 / 128

JetMove 208-480 1.1 General Information
Jetter AG 11
Table of Contents
1 Safety Instructions
1.1 General Information
The digital servo amplifier JetMove 208-480 fulfils the accepted safety regulations
and standards. Special emphasis was given to the safety of the users.
The following additional regulations apply to the user:
• Pertinent accident prevention regulations;
• Accepted safety rules;
• EC guidelines and other country-specific regulations.
1.1.1 Usage to the Intended Purpose
Usage to the intended purpose includes operation in accordance with this user
manual.
The digital servo amplifier JetMove 208-480 may only be operated in the closed
control cabinet and within the range of the set values.
Do not apply a voltage to the digital servo amplifier JetMove 208-480 that is
higher than the prescribed operating voltage.
Each of the three phases of the digital servo amplifier JetMove 208-480 has got an
operating voltage ranging between AC 340 V and AC 530 V. Thus, the digital servo
amplifier JetMove 208-480 comes under the EG Low Voltage Directive.
It is the explicit purpose of the digital servo controller JetMove 208-480 to
torque-, speed- and/or position-control, and to drive brushless synchronous
servo motors, asynchronous motors and three-phase stepper motors. The
rated voltage of the motors must be higher than, or at least equal to, the DC
link voltage supplied by the servo amplifier.
The digital servo amplifier JetMove 208-480 is used to drive machinery, such as
conveyors, production machines, and handling machines.
1.1.2 Non-Intended Use
The digital servo amplifier JetMove 208-480 must not be used in technical
systems which to a high degree have to be fail-save, e. g. ropeways and
aeroplanes.
Please do not use the integrated braking circuit in applications, where safety
hazards can occur.
The digital servo amplifier JetMove 208-480 is not a safety-relevant device
according to the machinery directive 2006/42/EG. Therefore, using this servo
amplifier for safety-relevant applications as regards safety of persons is
neither adequate nor permitted.