Jetter JM-204-480, User Manual, Page: 89 / 126

JetMove 204-480 12 Ethernet Interface (Option)
Jetter AG 89
12 Ethernet Interface (Option)
12.1 Function
For the JetMove 204-480, an optional integrated Ethernet interface can be ordered
(article designation of the device: JM-204-480...-OEM). This enables the JetMove
204-480 to be addressed by the controller via Ethernet instead of being addressed
by the Jetter system bus.
12.2 Description of Connections
The digital servo amplifier JetMove 204-480...-OEM is connected with the Ethernet
by the RJ45 female connector (X71).
There are two types of interconnecting cables used for 10/100 MBit/s twisted pair
Ethernet.
• Straight-through twisted pair cables
• Crossover cables (transmitting and receiving lines are crossed)
Functional Equipment
1 Ethernet interface 10/100 MBit/s, TX
10-pin DIP switch for the lower 8 bits of
the IP address and various operating
modes RUN / STOP / LOAD
LED for status indication RUN / ERR