Jetter JM-204-480, User Manual, Page: 53 / 126

JetMove 204-480 7.2 Motor Connection
Jetter AG 53
For connection with motor holding brake
Dimensions of the motor mating connector are specified in millimeters.
Motor Power Cable - Cable Confection No. 202
Field Wiring
Terminals of the
JetMove 204-480
Shielding Mating
Connector of the
Motor (female,
solder side)
(4 x 4 mm² + (2 x
0.5 mm
2
))
(AWG 12(4) +
AWG 20(2))
Highly flexible
6-wire cable
with PE (GND)
(separately
shielded brake
lines and all-
over shielding)
The wires are
equipped with wire end
ferrules.
Connect both sides of the shield
with the greatest possible surface
area!
Use metallized housing only!
Pin Wire Number Signal Pin
X62.U2 1 Phase 1 U
X62.V2 2 Phase 2 V
X62.W2 3 Phase 3 W
X62.PE
(GND)
yellow-green PE / GND
conductor
X10.BRAKE2 5 Brake + +
X10.GND 6 Brake - -