Jetter JM-105, User Manual, Page: 16 / 106

1 Safety Instructions
16 Jetter AG
1.4 Instructions on EMC
The digital servo amplifier JetMove 105 is intended for use in industrial environment.
It may cause radio interferences when used in residential areas. It is operated at the
operator's own risk.
The electromagnetic immunity of a system depends on the weakest component of
the system. For this reason, correct wiring and shielding of cables is of paramount
importance.
Caution
DANGER of injuries caused by mechanic force!
The digital servo amplifier JetMove 105 drives a motor. This motor moves
mechanic parts or sharp edges. Therefore, failure or malfunctioning of the digital
servo amplifier JetMove 105 can be dangerous for persons or damage the
machinery. This should be prevented by installing additional safety devices.
• One safety precaution is to install a second set of limit switches to interrupt the
power supply of the motor.
• Another safety precaution would be installing a guard.
Make sure that hazards to persons are precluded even when the drive is
rotating unintentionally.
Warning
Do not remove any guards.
Do not wear gloves , lest they could get caught in the rotating drive shaft.
Never touch a rotating drive shaft.
Do not touch the motor during or after operation:
Temperatures can reach as high as 140 °C.
Important!
Measures for increasing EMC in electric plants:
Earth the device adequately according to chapter 1.2.3 "Earthing
procedure", page 15.