Jetter JetMove D203, User Manual

Page: 104 / 142

12 Option -JC24X
104 Jetter AG
12.5 Serial Interfaces
The integrated controller -JC24X has been equipped with two serial interfaces.
The first serial interface is an RS-232.
The second serial interface can
either be used as an RS-232 or as an RS-422.
These interfaces can serve for communication between the -JC24X and the PC on
which the JetSym programming interface has been installed. Yet, they also serve as
a connection between the integrated controller and the HMI.
RS-232 Ser1 and Ser2 (8-Pin MiniDIN Jack)
Ser1 or Ser2 Jack Pin Signal Comment
1 - RS-422 (Ser2 only)
2 GND Ground
3 - RS-422 (Ser2 only)
4 RxD RS-232
5 - RS-422 (Ser2 only)
6 DC 24 V Power supply of the
HMI (Ser2 only)
7 - RS-422 (Ser2 only)
8 TxD RS-232
RS-422 Ser2 (8-Pin MiniDIN Jack)
Ser1 or Ser2 Jack Pin Signal Comment
1 RDA RS-422
2 GND Ground
3 RDB RS-422
4 - RS-232
5 SDB RS-422
6 DC 24 V Supply of the HMI
7 SDA RS-422
8 - RS-232
1
3 4 5
6 7 8
2
1
3 4 5
6 7 8
2