Jetter JetMove 208-480, User Manual, Page: 95 / 124

JetMove 208-480 12 Ethernet Interface (Option)
Jetter AG 93
12.3 Logic Circuit LEDs, Mode Selector
12.3.1 LEDs
The present status of the LED can be queried from register 10182.
.
INFO
If the proper cable is not available, the uplink port of a switch/hub can be used.
The pin assignment of an uplink port allows connection of terminals or can be
switched over.
Some devices are provided with an automatic crossover function which ensures
automatic adjustment to the cable and distant station.
Logic Circuit LEDs
ERR (red) Flashes shortly at initializing.
It remains lit in case of an initialization
error at the Ethernet interface.
RUN (green) Flashes regularly at correct functioning
of the Ethernet interface.
Error Messages indicated by LEDs
Following power-up the red LED (ERR)
and the green LED (RUN) are flashing. The switch is in LOAD position.
The boot loader is running.
The OS of the Ethernet interface is
neither checked nor launched.
After switching on, red (ERR) flashes
three times, after this, both LEDs, red
(ERR) and green (RUN) are flashing
simultaneously. The switch is in RUN or STOP position.
The boot loader is running.
There is no valid operating system of
the Ethernet interface available.
The red LED (ERR) and the green LED
(RUN) are flashing alternately during
runtime. Fatal operating system error of the
Ethernet interface