Jetter JetMove 208-480, User Manual, Page: 40 / 124

5 Technical Data
40 Jetter AG
Braking relay V
max
= DC 30 V
I
max
= DC 2 A
Contact: Type NO
connected to BR1 and BR2 on X10
The lines may only be connected to
devices that are related to the same
potential as the power supply of the
controller logic.
Can be switched by the control program of
PLC or by operating system of JetMove
208-480 together with software enable.
Digital Outputs
Number of outputs
Type of outputs
Rated voltage
Voltage range
Load current
Electrical isolation
Protective circuit
Protection against inductive loads
Signal voltage ON
4
Transistor pnp type
24 V
20 ... 30 V related to the ground potential of
voltage supply of processor logics
max. 0.5 A / output
None
Short-circuit, overload, overvoltage,
overtemperature protection
Yes
Type V
supply
- 1.5 V
Power dissipation P
v
Output stage: 125 W max.
Logic circuit: 20 W max.
Electrical Specifications