Jetter JetMove 208-480, User Manual, Page: 31 / 124

JetMove 208-480
Jetter AG 31
The following note must be observed for the amplifier models JM-2xx-xxx-OEM-...
and JM-D203-JC-2xx-...
Mounting position Vertical (refer to Fig. 4 page
25)
For sufficient air flow there
must be a clearance of
100 mm above and below the
device
Electrical Safety Conditions Reference
Class of protection I DIN EN 50178
Dielectric strength Power to Earth and
Power to Logic DIN EN 61800-5-1
DIN EN 60146-1-1
DIN EN 60204
2.65 kV, 2 s
Isolation Power to Earth and
Power to Logic
> 1 MOhm at 500 V
Protective connection 12 V, 25 A, 0.1 Ohm DIN EN 60204
Overvoltage category III DIN EN 50178
DIN VDE 0110-1
Operating Parameters
NOTICE
Measures to avoid damages in transit and storage:
The packing material and the storage place are to be chosen in a way
that the values given in the above table "Operating Parameters" on
page 29 are met.
NOTICE
The quality of the Ethernet cable has a significant influence on the EMC values
given in the following tables.
Use a CAT6 cable (S/FTP design) as Ethernet cable.