Jetter JC-120MC, User Manual

Page: 464 / 634

464 Jetter AG
10 Programming
10.16.2 Functioning principle of the user-programmable serial
interface
This chapter describes the functioning principle of the user-programmable
serial interface.
When using the user-programmable serial interface the following restrictions
apply:
 Irrespective of the fact that various hardware drivers have been
implemented, only one hardware interface is available.
This means: While, for example, communication via RS-422 is taking
place, simultaneous and independent communication via RS-232 is not
possible.

The controller does not execute the pcomX protocol any more.
This means: This protocol can no longer be used to communicate, for
example, with JetSym, JetViewSoft or HMIs via this protocol.
Topic Page
Functioning principle ................................................................................... 465
Introduction
Restrictions
Contents