Jetter JC-120MC, User Manual

Page: 279 / 634

Jetter AG 279
JC-120MC Programming
Description of system command registers
The following registers are used in this manual:
Registers Description
R 202960 System password register
R 202961 System command register
R 202962
System status register
System password register
Enter system password 1112502132 (0x424F6F74) into this register. Then
enter the required command value into the system command register. Now,
the controller sets the value of this register to 0.
Register properties
Value 1112502132 (0x424F6F74)
System command register
Enter the system commands into this register. Then the controller executes
the command. Then, it sets the value of this register to 0.
Commands
102
Restart the controller
104 Reset remanent parameters
122 Deactivate - Wait for communication
123 Activate - Wait for communication
160 Deactivate - Task switch on I/O access
161 Activate - Task switch on I/O access
170 Deactivate - Resume task time slot
Registers - Overview
R 202960
R 202961