Jetter JC-120MC, User Manual

Page: 198 / 634

198 Jetter AG
10 Programming
Abbreviations, module register properties and formats
The abbreviations used in this document are listed in the table below:
Abbreviation Description
R 100 Register 100
MR 150 Module register 150
Each module register is characterized by certain properties. Most properties
are identical for many module registers - the value after reset is always zero,
for example. In the following description, module register properties are
mentioned only if a property deviates from the following default properties.
Module register properties Default property for most module registers
Access Read/write
Value after reset 0 or undefined (e.g. release number)
Takes effect Immediately
Write access Always
Data type Integer
The numerical formats used in this document are listed in the table below:
Notation Numerical format
100 Decimal
0x100 Hexadecimal
0b100 Binary
The notation for sample programs used in this document is listed in the table
below:
Notation Description
Var, When, Task
Keyword
BitClear();
Commands
100 0x100 0b100
Constant numerical values
// This is a comment
Comment
// ...
Further program processing
Abbreviations
Module register
properties
Numerical formats
JetSym sample
programs