Jette Jupiter, User Manual, Page: 18 / 100

Now place yourself at the side of the push bar and pull both of the stroller
push bar’s plastic rings upward at the same time (fig.16). Then move the
push bar to the other side until it clicks into place (fig. 17).
In order to adjust the push bar’s height, please press the two buttons
provided on the push bar’s left and right side (fig. 18).
ATTENTION:
please always ensure movable parts to be out of reach of your
child’s hands or other body parts.
Setting the XL carrying bag up:
To set the carrying bag up, first of all remove the cloth mattress (lying area).
Now slide the two spring clips to the outside until the clips snap into the
notches and the carrying bag is spanned (fig.19). Now you can put the cloth
mattress back into the carrying bag.
To fold the carrying bag, first of all remove the cloth mattress (lying area)
and then slide the two spring clips to the inside (fig. 20). Then you can put
the cloth mattress back into the carrying bag.
Attaching/removing the XL carrying bag:
Put the back rest and the foot rest in lying position and remove the bow.
Now put the carrying bag on the lying area of the seat (fig.21). For a safe
fastening of the carrying bag, put the two safety pins - which are fixed on
the carrying bag - into the notches of the bow on the frame (fig.22).
Through pulling slightly on the safety pins you can see if they are locked in
place.
To remove the safety pins, press the locking mechanism on the sides
(fig.14).
ATTENTION: If you use the baby buggy with the carrying bag, always fasten
it with the safety pins.
GB