Jette Jupiter, User Manual, Page: 17 / 100

Adjusting the back rest:
In order to be able to adjust the position of the back rest, simply press the
adjusting mechanism down and adjust the back rest to the required position
(fig. 9).
Mounting and demounting the roof:
Insert the two plastic clips for the roof into the plastic slots in the right and
left hand side (fig. 10). Check whether the roof has slotted into place by
pulling it upwards.
In order to demount the roof, please press both plastic push-buttons (fig.11)
provided inside the plastic rail underneath the seat cover, and pull up the
roof.
WARNING: Always fold the roof before you fold up the pram.
Safety belt:
To put the safety belt on close the two belt buckles (A and B) at the central
piece (C). To open the safety belt press the clips on the side at the same
time and pull the buckles apart (figure 12). To guarantee the maximum
safety for you child adjust the length of the belt to fit your child. The length
of the belt should be adjusted so that the belt fits tightly.
Removing the safety bar:
To attach the bow, put it in the two provided notches for the bow on the
seat (fig.13).
To demount the bow, press the locking mechanism on the inner side of the
bow retainer and pull the bow out (fig.14).
To change the height of the bow, press both buttons on the outside (fig.15).
Rotatable and height adjustable push bar:
In order to rotate the stroller’s push bar, please first loosen the Velcro strips
(fig.3).
GB