JetStor JX Series Manual Download Page 45

Page: 45 / 53

CLI Command Sets

Check the 16 voltage sensors in system.

CLI >

volt

Quantity of voltage sensors: 16

Voltage Sensor

Value

Status

-----------------------------------------------
Ctrl 1 Volt +3.3V

3.32V

Ctrl 1 Volt +12V

12.24V

Ctrl 1 Volt +5V standby

5.10V

Ctrl 1 Volt +3.3V standby

3.32V

Ctrl 1 Volt +1.8V

1.81V

Ctrl 1 Volt +0.9V

0.92V

Ctrl 2 Volt +3.3V

3.32V

Ctrl 2 Volt +12V

12.24V

Ctrl 2 Volt +5V standby

5.10V

Ctrl 2 Volt +3.3V standby

3.32V

Ctrl 2 Volt +1.8V

1.81V

Ctrl 2 Volt +0.9V

0.92V

Bac12V

12.00V

Bac5V

5.05V

Bac3.3V

3.30V

Bac3.3V standby

3.31V

Table 2-3

Voltage Description

Column Name

Description

Status

The status of the voltage:



OK: The voltage sensor is present and no error.



CRIT: The voltage sensor detected a critical error condition.



WARN: The voltage sensor detected a warning error condition.



FAIL: The voltage sensor is not accessible.

2.6.3.

Show PSU Information (psu)

Command

psu

Description

Show the information of power supply units in the system.

Syntax

psu

Summary of Contents for JX Series






















































Search results

Summary of Contents for JX Series

Reviews:

Related manuals for JX Series

Brands by name

Popular brands

JetStor JX Series, Manual

Search results

Summary of Contents for JX Series

Reviews:

Related manuals for JX Series

Brands by name

Popular brands