background image

35

Care & Maintenance

RIDING RANGE

THE MAXIMUM RANGE IS 12 MILES. HOWEVER, MANY FACTORS WILL AFFECT HOW FAR YOU CAN GO PER CHARGE:
• DRIVING SURFACE: A SMOOTH, FLAT SURFACE WILL INCREASE DRIVING DISTANCE.
• WEIGHT: MORE WEIGHT MEANS LESS DISTANCE.
• TEMPERATURE: RIDE, STORE, AND CHARGE THE REMIX ABOVE 50°F.
• MAINTENANCE: TIMELY BATTERY CHARGING OF UP TO 4 HOURS PER CHARGE WILL INCREASE DRIVING DISTANCE. 
• DRIVING STYLE: FREQUENT STARTING AND STOPPING WILL REDUCE DRIVING DISTANCE.

CLEANING THE REMIX

• TO CLEAN THE REMIX, CAREFULLY WIPE WITH A DAMP CLOTH, THEN DRY WITH A DRY CLOTH. 
• DO NOT USE WATER TO CLEAN THE REMIX, AS THE ELECTRICAL AND ELECTRONIC SYSTEMS MAY GET WET, 
RESULTING IN PERSONAL INJURY OR MALFUNCTION OF THE REMIX. 
• IF THE ELECTRIC PARTS OR BATTERY GET WET, DO NOT POWER ON THE REMIX. PLEASE CONTACT JETSON CUSTOMER 
CARE FOR ASSISTANCE.

BATTERY

• KEEP AWAY FROM FIRE AND EXCESSIVE HEAT. 
• AVOID INTENSE PHYSICAL SHOCK, SEVERE VIBRATION, OR IMPACT. 
• PROTECT FROM WATER OR MOISTURE.
• DO NOT DISASSEMBLE THE REMIX OR ITS BATTERY.
• CONTACT JETSON CUSTOMER CARE IF THERE ARE ANY ISSUES WITH THE BATTERY.

STORAGE

• FULLY CHARGE THE BATTERY BEFORE STORING. THE BATTERY SHOULD BE FULLY CHARGED ONCE A MONTH AFTER THIS.
• STORE THE REMIX INDOORS IN A DRY PLACE.
• COVER THE REMIX TO PROTECT AGAINST DUST.

ONE-YEAR GENERAL LIMITED WARRANTY

All new Jetson products, excluding parts and accessories, are warranted against defects in materials and workmanship 
for a period of one year from the date of original retail purchase when used in accordance with Jetson's user manuals 
(refer to ridejetson.com/support).

Under this warranty, you will be able to direct your claims to Jetson even in situations where you purchased the 
Jetson Product from one of our authorized retailers.

To read the full terms of our warranty, visit ridejetson.com/warranty.

Summary of Contents for REMIX JETKART









































Reviews: