Jet Micro HX 3.0, User Manual, Page: 16 / 25

Global Settings
For detailed information about this feature and how it works, please visit the Description page.
To enable or disable this feature, turn power off and back on to the Micro. While the Micro is
in the startup phase (blinking LED's) press down button C and continue to hold it down. Once
you are in the global settings (the LED will either be off, solid red, green, or blue) pressing
button A will toggle the LED between off, red, green, or blue.
If the LED is:
Off - tap tempo is disabled
Red - button A is "Always Active" tap tempo and will no longer toggle blocks or
effect parameters
Green- button B is "Always Active" tap tempo and will no longer toggle blocks or
effect parameters
Blue - button C is "Always Active" tap tempo and will no longer toggle blocks or
effect parameters
Once you have reached your desired setting, simply release button C and the Micro will save
your settings into permanent memory and exit the global settings.
Always Active Tap Tempo