2
DANGER: RISK OF ELECTRIC SHOCK,
DO NOT OPEN
ATTENTION: RISQUE DE CHOC
ELECTRIQUE!
NE PAS OUVIRIR!
ACHTUNG: STROMSHLAG GEFÄHRDUNG,
NICHT AUFMACHEN!
CAUTION:
To reduce the risk of electric shock, do not
remove cover or open rear panel. No user serviceable parts
inside: refer handling to qualified personnel.
WARNING: To reduce the risk of fire or electric shock, do not
expose this amplifier to rain or moisture.
Before using your amp.
Before operating the Custom 22 please make sure of the following:
First, connect the amp head to a speaker cabinet or other
suitable load. Never run the amp without a load connected
to the output.
Connect the power cable into the back panel and then to a
power outlet.
With the amp in the standby position, switch the power to
ON and wait about 30 seconds for the tubes to warm up.
Change the standby switch to ON.
You’re ready to go.
WARNING: If a speaker or suitable “dummy load” is not connected to
the speaker output, output transformer failure is very possible.
