9
Step 9:
Attaching the guard to the fence
a.
Slide the
1
⁄
4
"-20 X 1-
1
⁄
2
" hex head screw (part #10) up through
the centre hole in the guard mount.
See figure 13
. Thread the
guard mount clamping knob (part #8) onto the hex head screw.
DO NOT
tighten all the way. Leave loose enough to slide into
the T-slot in the upper fence (part #11).
e.
Ensure the right and left hand track scale (part #17 & #35) are
on the proper sides.
See Figure 12.
f.
With the
1
⁄
8
" hex key provided, loosen the set screws (part #16)
on the front of the left and right hand scales.
See Figure 12.
g.
Slide the scale to align the “0” on the scale with the front edge
of the fence.
See Figure 12.
h.
Tighten the set screw. Repeat this for the other scale on the
opposite side of the fence. The Mast-R-Fence III should now
be centred on your router table.
b.
Slide the guard mount (part #9) into the T-slot by aligning the
1
⁄
4
"-20 X 1-
1
⁄
2
" hex head screw (part #10) in the top of the upper
fence (part #11).
10
9
8
Figure 13
16
35
Figure 12
9
10
11
Figure 14
Assembling the guard mount:
Attaching the guard mount to the fence:
Step 8:
Continued
ASSEMBLING AND ATTACHING THE MAST-R-FENCE III GUARD
16
35
8
9
10
9
11
10
