6
Step 4:
Mounting of tracks to mounting angles
a.
Place
1
⁄
4
" washers (part #23) onto the
1
⁄
4
"-20 X
5
⁄
8
" socket head
cap screws (part #29).
b.
Slide the screws through the slots in the left and right hand
track (part #18)
See figure 3.
c.
Thread the square nuts (part #28) onto the screws. (
DO NOT
tighten the square nuts. Leave loose for the next step)
a.
Slide the square nuts (part #28) into the T-slot in the mounting
angle (part #20).
See figure 4.
b.
Align the track so that the back of the track is flush with the
back of the top.
See figure 5.
c.
Snug the
1
⁄
4
"-20 X
5
⁄
8
" socket head cap screws (part #29).
29
23
18
28
Figure 3
18
28
29
20
Figure 4
18
Figure 5
Step 3:
Attaching the square nuts
18
29
23
28
18
28
29
20
18
