12
Step 13:
Attaching new fence faces
a.
Slide the fence face clamping knobs (part #38) into the previ-
ously drilled holes in your new fence faces.
See figure 19.
b.
Slide the fence face clamping knobs into the slots in the fence
uprights (part #12).
c.
Reattach with clamping knobs (part #22).
38
37
22
Figure 19
MAST-R-FENCE III JOINTING
Step 14:
Storage of shimming bars (when not in use)
Step 15:
Using the shimming bars
a.
Slide the shimming bars (part #33) into the shimming bar hold-
ers (part #21) until the detent “clicks” into place.
a.
Loosen the fence face clamping knobs (part #22) until there is
enough play behind the fence face to slide the shimming bars
behind.
b.
Slide the fence shimming bars (part #33) into the matching
grooves on the left hand fence upright (part #12, outfeed side).
c.
When sliding the shimming bars into the left hand fence upright
(part #12) match the laser engraved feed direction to the de-
sired jointing spacing. (
1
⁄
16
" or
1
⁄
32
").
d.
Once the shimming bar is behind the fence face, tighten the
fence face clamping knobs (part #22).
33
21
Figure 20
33
Figure 21
22
37
38
21
33
33
