Jessberger JP-16 Instruction Manual Download Page 1

 

 

MANUAL PUMP JP-16 | 15.02.2017 

 

INSTRUCTION MANUAL PUMP JP-16 

 

 

 

 

 

 

 

Manual pump JP-16  

 

The instruction manual is always to be read before commission-
ing the equipment. No warranty claim will be granted for faults 
and damage to the equipment arising from insufficient 
knowledge of the instruction manual. 

 

Table of contents 

1  Safety informations

 

2  Product description

 

2.1  Product versions 

2.2  Permitted media  

2.3  Technical data 

2.4  Environment 

2.5  Accessories 

3  

3  Assembly

 

3.1  Assembly instructions 

3.2  Securing against unauthorised use  3 

4  Operation

 

4.1  Commissioning 

4.2  Normal operation 

5  Maintenance

 

6  Disposal

 

5  Spare parts

 

 

 

1. Safety instructions 

The device is a state of the art piece of equipment and has been 

constructed according to recognized safety specifications.lt is 

nevertheless possible that use of the device will present hazards to 

the operator or to third parties, or may damage the device or other 

property.lt is therefore essential to act in accordance with these 

safety instructions, and in particular with those sections identified as 

warnings. 

Warning notices and symbols  

In the operating manual, the following signs are used for highlighting 

important information. 

Special information for economical use of the equipment. 
Special information or “dos and don´ts” for damage 
prevention. 
Information or “dos and don'ts" for the prevention of 
damage to persons or equipment. 
 

 
 

 

JP-16

 

INSTRUCTION MANUAL 

 

JESSBERGER GmbH 

Jaegerweg 5

D-85521 Ottobrunn 

Germany 

Phone:  +49 (0) 89 - 66 66 33 400 

Fax:  +49 (0) 89 - 66 66 33 411 

www.jesspumpen.de 

[email protected] 

Summary of Contents for JP-16

Page 1: ...state of the art piece of equipment and has been constructed according to recognized safety specifications lt is nevertheless possible that use of the device will present hazards to the operator or to third parties or may damage the device or other property lt is therefore essential to act in accordance with these safety instructions and in particular with those sections identified as warnings War...

Page 2: ...tances The regulations on the operating place e g Water Resources Act WHG ordinance on installations for handling of substances hazardous to water VAwS must be adhered to Hydraulics Only persons with special knowledge and experience with hydraulic systems may carry out work on hydraulic parts and equipment All lines hoses and screw joints should regularly be checked for leaks and visible external ...

Page 3: ... outlet valve AV 20 and anti kink spring Hose fittings 1 5 m DN 19 x 4 LZ19 with insert elec conductive hazard class A I III with outlet valve AV 20 and anti kink spring RME resistant 3 Assembly Remove completely the packing material and you obey then the instruction for assembly 3 1 Assembly instructions Suction connection Screw suction tube 4 in suction face of the pump pivot 6 Optional Place su...

Page 4: ...on as the pumped quantity falls oft noticeably check the filter in the suction pipe and clean it if necessary Regularly check for leaks at the discharge hose and at the connecting elements Faulty seals or hoses must be exchanged immediately 6 Disposal The device is to be emptied completely and the liquids properly disposed of in case it is taken out of service The equipment is to be disposed of pr...

Reviews: