Jersey Jack Pinball Pirates of the Caribbean, Operation Manual, Page: 58 / 359

The POTC Menu System B-22
System Settings
When you enter the
System Settings
menu, the LCD monitor will display the screen shown in figure
B23. Settings that have been changed from factory defaults are displayed in red. Default settings
are displayed in green, but only when a menu item is highlighted. Menu items that cannot be altered
are displayed in gray. You can scroll through menu items with the Up/+ and Down/- buttons; press
Enter to select an item you would like to change. Use the Up/+ and Down/- buttons to alter the
highlighted data value, then press
Enter
to accept the new value. Press
Back/Escape
to escape from
a selected menu item without saving changes. NOTE: Pindemption® settings are only available in a
POTC game with a Pindemption®-enabled security dongle.
To exit the System Settings menu at any time, press the Back/Escape button.
GENERAL
Game Play Type : specify how the game will end: after a designated number of balls played or a
designated amount of time. <Pindemption® setting>
BALLS: traditional style of pinball play Default: BALLS
TIME: timed pinball play
Ball Play Type : specify how extra balls will be played during a game. With the BALLS IN PLAY option,
extra balls will be played immediately after the ball on which they are earned. With the BALLS IN
RESERVE option, earned extra balls will be held until the end of the game, with players continuing to
take turns playing one ball at a time until all balls in reserve have been played.
BALLS IN PLAY: extra ball played immediately Default: BALLS IN PLAY
BALLS IN RESERVE: extra ball held in reserve, to play later
Balls Per Game : specify the number of balls each player gets to play within a single game.
1-5: 1-5 balls Default: 3 balls
Time Per Game : specify how long a game will last. <Pindemption® setting>
30-300: 30-300 seconds Default: 45 seconds
Figure B22. System Settings screen.