Jersey Jack Pinball Pirates of the Caribbean, Operation Manual

Page: 23 / 359

Game Assembly & Setup A-11
19)
A bubble level (figure A17) is attached to the playfield's right woodrail, next to the
ball shooter lane, to indicate the optimal pitch of the playfield (back-to-front) for game
play. Adjust the levelers and tightening nuts on the game's four legs until the top of the
bubble in the level is just touching the second reference line, as shown in figure A17. This
will provide a playfield pitch angle of 6.5°.
Figure A17. Playfield pitch bubble level.
Note:
Ensure that the playfield remains level, side-to-side, as you adjust its pitch.
6.5° Pitch
Indicator Line
Figure A18. Transport game with the backbox lowered and secured.
Note:
Before transporting the game, lower the backbox (figure A18). Insert the 5/16”
hex key into the hole at the base of the backbox and turn it a full 270 degrees CCW. En-
sure that cables and wires in the neck of the machine do not get pinched or pulled taut
as the backbox is laid down. Place a large piece of cardboard (or the piece of foam used
when the game was shipped) between the top lip of the backbox and the lower cabinet
to protect the cabinet side rails. Tie or strap the backbox securely to the cabinet to pre-
vent it from bouncing during transit.