5-20
TMPM5200-2
5.3 PREPARING FOR MEASUREMENT
.3.1 Starting the System in Measurement Mode
1.
2.
computer. Doing this starts Windows.
ent mode
The term “approach” means moving the cantilever probe toward the specimen to the
point where inter-atomic forces come into play or a tunnel current flows. Before starting
measurement, carry out the following procedures and perform the approach.
5
Make sure that the specimen is mounted and that the cantilever probe is
fastened in place, and that they are in position before starting the approach.
Turn on the SPM controller and the
The computer does not turn on even if the SPM controller is turned on. The
computer must be turned on independently.
When any of the optional units are connected, similarly turn them on.
3.
Double-click the measurement icon. WinSPM starts in measurem
and the login dialog will appear.
(Measurement icon)
4.
Enter the user name and password and click on the Login button.
The measurement mode window that appears during startup opens.
