5 OPERATION
5-52
EM210F-1
5.7.2 Free Lens Control (FLC)
You can freely vary each lens individually and create special lens conditions of use.
Also, you can record and save the lens conditions that you created in FLC FILE.
1.
Select “Option” on the main menu on the “TEM Controller” screen to open the
“FLC Panel” screen (
F
Fig. 5.47).
2.
Give a check mark to “On” for the lens to be controlled or “ALL”.
3.
Move the scroll bar on the screen to vary the lens current.
4.
Click the “Save” button on the screen to save the file and click the “Load”
button to read the file.
Sect. 4.4.6k
①
Sect. 4.4.6k
②
Sect. 4.4.6k
⑥
Sect. 4.4.6k
⑦
Sect. 4.4.6k
③
Sect. 4.4.6k
④
Fig. 5.47 FLC Panel screen
5.
Give a check mark to “Off “ for the lens to be turned off or give to “ALL-Off” to
terminate the FLC (Free Lens Control) mode operation.
?
When the screen is closed without giving a check mark to “ALL-Off”, the FLC
is left functioning.
