JENZI
- Wilhelm-Bahmueller-Str. 53 - D-73655 Pluederhausen - Germany, www.jenzi.com
EN - INSTRUCTION MANUAL
Version 09/14
DIGITAL BITE ALARM
TYP: JZ-825
PRODUCT-NR: 8252 001
1.
DESCRIPTION
5.1.
Scope of supply
Padded Bag
4 Digital Bite Alarms
1 Receiver
3 Batteries Typ Micro AAA 1,5V
4 Batteries Typ 12V 23A
5.2.
Technical data
5.2.1. Digital Bite Alarm Indicator
The Digital Bite Alarm operates on two batteries type 12V 23A
Dimensions :
100x45x33 mm
Weight:
69g
Operating voltage: 12V
5.2.2. Receiver
The Receiver operates on three batteries type Micro AAA 1,5V
Dimensions :
110x55x33 mm
Weight:
67g
Operating voltage: 4,5V
6.
OPERATION & SETUP
6.1.
Insert Batteries in both devices
Carefully open the battery compartment at the back of the device. Insert batteries. Observe
correct polarity. Close the battery compartment.
6.2.
Operation
6.2.1. Digital Bite Alarm Settings
On / Off:
Push long on the Volume control button (1) for the following settings:
Press once to turn the Alarm on. You will hear a signal. You can turn the digital
bite alarm off, by pressing the volume control button (1) again, activating the
nightlight setting, and pressing the volume control button a second time until the
Digital Bite Alarm flashes and beeps 8 times in a row.
Volume:
Push short on the Volume control button (1) to set the volume to the desired level.
Having reached the loudest, the Digital Bite Alarm will start again with the lowest volume setting.
Tone:
To change the tone settings push the Tone control button (T) when the Digital Bite Alarm is
turned on. Continue to push to find the desired ton.
Sensitivity:
Push the sensitivity control button (S) when the Digital Bite Alarm is turned on.
Continue to push to set the desired range, from 1 beep (most sensitive) to 4 beeps (least
sensitive).
