This equipment may be operated in all EU and EFTA countries: AT, BE, BG, CY, CZ, DK, EE, FI,
FR, DE, GR, HU, IS, IE, IT, LV,LI, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, TR, GB
PRODUCT USAGE RESTRICTIONS: This product is intended for indoor use only.
Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive):
Hereby, Jensen Scandinavia AS, declares that this wireless router is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of confirmity may be consulted at www.jensenscandinavia.com/rtte/
WPS LED
WPS status LED.
WPS LED is flashing when
setting up a WPS connection.
Internet
1
2
3
4
Installation Guide
Power connector
5GHz LED
LED that show status
for the 5GHz network.
The LED’s will flash when
active.
Internet port
Please connect your
broadband modem
to the internet port.
Reset / WPS*
Reset: Hold for about 7 seconds to
reset the router to factory default.
WPS: Hold for about to 1-2 seconds
to initiate WPS connection.
* WPS is disabled as default
and needed to be activated in
router GUI (http://192.168.38.1) before
use.
Network ports
Ports for connecting network
devices by cable, such as computer,
TV, Media Server, Network printer,
VOIP adapter etc.
2.4GHz LED
LED that show status
for the 2.4GHz network.
The LED will flash when
active.
Network ports LED
Show status for devices
that are connected to
the router by cable.
Internet LED
LED that show status
for the Internet port.
The LED will flash when active.
USB LED
Indicates if the USB port is correctly
connected.
USB port
USB port for connecting
a printer or USB hard disk drive.
Power LED
Model: AL3000DGv3