Installation guide for Air:Link 59300
Internet Setup
This guide will help you setup your Internet connection. The setup should take around 5 minutes.
- Check that you have a wired or wireless network card installed and activated in your PC.
- Connect the poweradapter to the
PWR
port and the ADSL modem / cablemodem to the
WAN
port of
the router.
- If you use wired network you need to connect a network cable from the network card in your PC to
one of the 4
LAN
ports in the router.
- Check the front of the router that the LED's are lit correctly :
-
PWR
should be on to indicate the router is switched on and is powered correctly.
-
WLAN
should be on to indicate the WLAN is enabled, and will flash when there is wireless traffic.
-
LNK/ACT
on WAN should be on to indicate the modem is connected correctly to the WAN port, and
will flash when there is traffic. The 10/100M LED will show if the connection use 10 or 100Mbps.
-
LNK/ACT
on LAN 1-4 should be on when a network device (i.e. a PC) is connected to the named
port, and will flash when there is traffic. The 10/100M LED will show if the connection use 10 or
100Mbps.
When using a wireless network card/adapter you must now connect to the wireless network in the
router. How this is done may vary depending on what type of wireless network card/adapter and
Windows version you use.
Below you can find a list of different connections to make it easy to connect to the router. If you have a
different wireless network card/adapter or Windows version you must see the user manual for your
card/adapter for details on how to connect to a wireless network. The name of the network you must
connect to is
AirLink59300
.
Windows Vista
-
Connect using Jensen Air:Link 80300, 83300 or 85300
-
Connect using a built-in wireless card and using Windows WLAN Utility
Windows XP
-
Connect using Jensen Air:Link 80300, 83300 or 85300
-
Connect using a built-in wireless card and using Windows WLAN Utility (Servicepack 1)
-
Connect using a built-in wireless card and using Windows WLAN Utility (Servicepack 2)
Windows 2000
-
Connect using Jensen Air:Link 80300, 83300 or 85300
When you have connected your PC with wired or wireless network
card/adapter you can access the routers built-in menu to configure
the Internet setup.
- Click here to login to the router menu, or open your default
Internet browser (normally Internet Explorer), type in the address
http://192.168.0.1
in the address field and press
Enter
on the
keyboard to start the login. You should see a login box like in the
picture to the right.
- Type in "
admin
" as username and "
1234
" as password and click
OK
to login to the router menu.
