Jema 110 Series, Instruction Manual

Page: 6 / 14

-5-
NO
.
Troubles
Applicable
Model
Causes & Measures
All models
Troubles in cutting motor or counting sensor
-Turn on the machine and press the
button, check if the knife can be moved or
knife may locked.
-Open the button cover of the knife, check if
the sensor is loose and wrong positioned.
-Open main cover, check the SW of cutting
sensor is right or not. If not, exchange it.
Check the cutting motor is right or not.
02
Cutting error
6
03
Label error
It cuts before the
cutting line of label
It cuts after the
cutting line of label
Label
Label
Move the sensor towards knife side as long
as the difference by pushing.
Move the sensor towards counter-knife side
as long as the difference by pushing.
MARK error
Label
-Trouble in MARK sensor.
-Check if the sensor is connected well or not.
-Check if the sensor is adjusted well or not.
-Check if the input length is cord with the
label length.
7
Operator feels electric current in
touch of machine
All models
Connect the earth cord (green) to any bolt
of backside of machine.
MANUAL
No heating
Lamp on
Lamp off
Heating
series
-Check if the heating tube connected well
or not.
-Change a new heating tube.
-Check if the heating sensor connected well
or not.
-Change a new heating sensor..
8