Jema Autolifte DWC-9-E, Operating Manual

Page: 9 / 38

2.2 Keyboard description
Fig. 2.2 shows the wheel balancer's keyboard
(5 in fig. 2.1). All functions of each button have been described in table 2.2.
Description of buttons' functions (from fig. 2.2)
1
START Starting of measurement cycle
2
STOP Stopping a measurement cycle / imbalance correction place
movement
3
Q
Changing of threshold
4 3P Activate "Hidden weight" program
5 CAL Calibration
6
OPT Optimisation
7 Left Turn the wheel to left imbalance point
8
Distance Setting distance parameter
9 Diameter Setting diameter parameter
10
Width Setting width parameter
11
ALU Weight placement selection
12
Right Turn the wheel to right imbalance point
13 Plus Increase selected value
14 Minus Decrease selected value
15 M User memory
16
(?) Recalculate imbalance of the wheel
-
9
-