Quick
Start
9
Quick Start
You are no doubt eager to switch on the machine and try it out by making a lot
of fog. This section tells you how to do that. However, please also make the time
to read the safety and servicing instructions in the remainder of this manual.
S e t t i n g u p
Locate the machine in a suitably large area with nothing in front of the smoke
output. Read the “Installation” section before rigging the machine from
suspension points.
Fill the fluid tank with JEM-approved fluid (see page 19).
Connect a suitably rated power supply to the machine. The machine requires
13.1A at 230V (EU) or 11.8A at 208V (US).
Turn on the Standby switch. The display will show
(%!4
for about 8-12
minutes and will then change to
1$9
(Ready).
M a k i n g f o g
You can then use the Timer or Continuous switches on the back of the machine
or the buttons on the remote (optional accessory) to turn on the fog output.
If no fog is produced, check that the FOG option is not set to 0% (see page 13)
and that if using Timer mode the TRUN setting is not set to 0. Also check that
the machine has fluid.
