INSTALLATION
8
When .a .program .is .completed, .20 ."beeps" .sound .every .15 .minutes .to .remind .the .operator .that .the .
material .is .ready .to .cast .
1 . . .Be .sure .the .Infinity .is .in .the .idle .mode .- .no .program .us .running .
2 . . .Press . . . .and .(while .holding) .press .PROGRAM .NUMBER .to .display .the .status .of .the ."beep ." . .
. . . ."ON" .indicates .the .beep .is .active . . ."OFF" .indicates .the .beep .is .inactive .
3 . . .Use .either .of .the .
to .turn .the ."beeps" .on .or .off .
4 . . .To .return .to .the .idle .mode, .wait .7 .seconds .or .press .STOP ./ .START .twice . . .(If .STOP ./ .START
. . . . .is .pressed .once, .cycle .starts .)
TO TURN THE “BEEP” ON AND OFF
(Figure .1)
