３１
4.4.4 Auto Tuning
Update the parameter of PID temperature control. Optimum temperature for the main using temperature
is available. The unit is set to use the temperature on proper range. Once the temperature is not actual on
the main points during the actual use on the field, operating auto tuning will tune the temperature parameter
and make the unit operates the temperature on the actual temperature.
Touch the Set Temp. and put the desired value. Touch the START button and start the parameter tuning.
Touch the stop button during the tuning and stop the tuning. Once the tuning is complicated, touch the ok
button and save it.
4.4.5 Operating Parameters
Set the parameters for the other operating.
1
Position Sensor
Check the platform stop on the right position.
2
Stall Check
Check the belt when the platform is not working properly.
3
Defrost Use
Defrost is not for the IST model. Off the defrost use.
4
Load Unbalance
Once the vibration is generated, the shaking speed is adjustable.
5
Threshold
Load Unbalance check the vibration on the unit and adjust the
rpm automatically. The vibration is on the range of not controlling,
the automatic adjusting is operated.
4.4.6 Reset
Initialize the changed value to the factory value.
1
Temperature Calibration
Initialize the calibration value.
2
RPM Calibration
Initialize the calibration value.
3
Auto Tuning
Initialize the calibration value.
4
Touch Screen
Initialize the calibration value.
5
Operating Parameters
Initialize the calibration value.
6
Factory Default
Initialize the calibration value of all parts.
Auto tuning parameter can be initialized to the factory value.