JEI SteelBeast BM-21S Operator'S Manual Download Page 22

Page: 22 / 22

BM-21S

This document is protected by copyrights.

Copying, using, or distributing without permission of JEI Group Ltd is prohibited.

8. WARRANTY CARD

WARRANTY CARD No

.............

........................................................................... in the name of Manufacturer warrants

the BM-21S Bevelling Machine to be free of defects in material and workmanship

under normal use for a period of 12 months from the date of sale.

This warranty does not cover cutting inserts as well as damage or wear that

arise from misuse, accident, tempering or any other causes not related to defects in

workmanship or material.

Date of production .........................................................................................................

Serial number ................................................................................................................

Date of sale ...................................................................................................................

Signature of seller ..........................................................................................................

1.08 / 4 April 2017

WE RESERVE THE RIGHT TO MAKE CHANGES IN THIS MANUAL WITHOUT NOTICE

Summary of Contents for SteelBeast BM-21S























Search results

Summary of Contents for SteelBeast BM-21S

Reviews:

Related manuals for SteelBeast BM-21S

Brands by name

Popular brands

JEI SteelBeast BM-21S, Operator'S Manual

Search results

Summary of Contents for SteelBeast BM-21S

Reviews:

Related manuals for SteelBeast BM-21S

Brands by name

Popular brands