Minibeast Cordless
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Drilling & Cutting Solutions is prohibited.
15
4.8. Securing the machine with a safety strap
Always secure the machine with a safety strap!
It prevents the machine from falling if it loses the clamping.
Attach the machine to a stable structure by putting the strap through the hole in the
machine body. Make sure that the strap is tight and not twisted. If the machine
detaches from the workpiece and hangs on the strap, replace the strap. Do not put the
strap into the buckle from the front.
4.9. Machine state indication
There is an LED indicator on the control panel that shows state of the machine.
LED indication
Machine state
Machine performance
Green is on
Sufficient clamping force
–
Green flashes
Low clamping force
High risk of losing clamping
Red is on
Discharged battery
Motor stops,
after a time of up to 15 minutes the
electromagnetic base turns off
Red flashes
Motor overload or clamping loss
Motor stops
CORRECT
✓
Vertical drilling
INCORRECT
Inverted drilling
