WWW.JEIUK.COM
RAILBEAST ELECTRIC RDE-36
This document is protected by copyrights.
Copying, using, or distributing without permission of Ansa Group Ltd is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The RAILBEAST RDE-36 is a drilling machine designed to drill holes in rails of
UIC54, UIC60, P50, P65, S49, or any other standard. The machine can drill holes
with diameters of 36 mm (1.42
″
) by using annular cutters.
Ordered separately rail profile templates allow the machine to be clamped onto a
rail. Hole center positioners allow you to get the correct span between holes.
1.2. Technical data
Voltage
1~ 220
–240 V, 50–60 Hz
1~ 110
–120 V, 50–60 Hz
Power
1020 W
Tool holder
19 mm (3/4″) Weldon
Maximum drilling diameter
36 mm (1.42″)
Maximum drilling depth
30 mm (1.18″)
Stroke
40 mm (1.57″)
Rotational speed with no load
520 rpm
Rotational speed with load
350 rpm
Protection level
IP 20
Protection class
I
Noise level
More than 70 dB
Vibration level
1.55 m/s
2
(5.1 ft/s
2
)
Required ambient temperature
0
–40°C (32–104°F)
Weight
14.5 kg (32 lbs)
