INSTALLATION AND ADJUSTMENT
9
DC POSITIVE CONNECTION in TIG welding mode.
Packing list, such as welding torch
、
ground cable
、
gas hose, please refer to packing list in
details.
Those two pipe holder in packing list are used to connect strength pipe with argon gas bottle
and shield gas connector.
The control cable of torch switch consists of 2 wires, and the aero socket has 3 leads. Refer to
electrical principle drawing for detailed connection.
Consumable parts for TIG torch, such as tungsten electrode
、
tip
、
gas nozzle
、
electrode
shield(short/long) , please enquire us by mail or phone according to the accessory codes.
When TP- series welding machines are operated in HF ignition method, the ignition spark
can cause interferences in equipment near the welding machine. Be sure to take specially
safety precautions or shielding measures.
Put the ‘welding mode selection switch’ on front panel in 4T shelf or 2T shelf before doing
TIG welding.
It is better for the welding cable not to exceed 20M.
