Jeep Wrangler2018, Owner'S Manual

Page: 183 / 608

Oil Life Reset
1. Without pushing the brake pedal, push and release the
ENGINE START/STOP button and place the ignition to
the ON/RUN position (do not start the engine).
2. Navigate to
⬙
Oil Life
⬙
submenu in
⬙
Vehicle Info
⬙
in the
instrument cluster display.
3. Push and hold the OK button until the gauge resets to
100%.
Secondary Method For Oil Change Reset Procedure
1. Without pushing the brake pedal, push and release the
ENGINE START/STOP button and place the ignition to
the ON/RUN position (do not start the engine).
2. Fully press the accelerator pedal, slowly, three times
within ten seconds.
3. Without pushing the brake pedal, push and release the
ENGINE START/STOP button once to return the igni-
tion to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Instrument Cluster Display Menu Items
NOTE: The instrument cluster display menu items display
in the center of the instrument cluster. Menu items may
vary depending on your vehicle features.
Speedometer
Push and release the up or down arrow button until the
speedometer menu icon is displayed in the instrument
cluster display. Push and release the
OK button to toggle
between MPH and km/h.
Vehicle Info
Push and release the up or down arrow button until the
Vehicle Info menu icon is displayed in the instrument
cluster display. Push and release the
left or right arrow
button to scroll through the information submenus and
push and release the
OK
button to select or reset the
resettable submenus.
•
Tire Pressure
•
Coolant Temperature
•
Transmission Tem-
perature — Automatic
Transmission Only
•
Oil Pressure
•
Oil Temperature
•
Oil Life
•
Battery Voltage
4
GETTING TO KNOW YOUR INSTRUMENT PANEL 181