GETTING TO KNOW YOUR VEHICLE
25
Schedule Bypass
NOTE:
If the vehicle is turned off outside of the
charging window, a radio pop-up message will
be displayed. The pop-up message asks the
driver if they would like to “Charge Now?” and
provides the next charging schedule start time
and estimated time to charge the battery to
100%. If within one hour of selecting “Yes”, the
vehicle is connected to a powered EVSE, the
vehicle will immediately begin to charge (tempo
-
rarily ignoring any set charge schedule). To fully
deactivate the charge schedule, select the
“Enable Schedule” checkbox until the check
mark is removed from the box.
The charging schedule can also be overridden if
the EVSE is plugged in, unplugged, and then
plugged in a second time to the vehicle.
This double plug sequence will override the
set schedule in the Hybrid Electric Pages App,
and begin charging the vehicle immediately.
The double plug sequence must be completed
within 10 seconds for it to override the
programmed schedule.
eSave
The fourth screen within the “Hybrid Electric
Pages” App is the eSave screen. From this
screen, you can specify the behavior of the
eSave drive mode:
Battery Save - Maintains the high voltage
State of Charge at its current level.
Battery Charge - Uses additional power from
the gas engine to increase the high voltage
State of Charge, up to 95% capacity.
IGNITION SWITCH
This feature allows the driver to operate the
ignition switch with the push of a button as long
as the key fob is in the passenger compartment.
NOTE:
This vehicle is equipped with an automatic shut
-
down feature. If the vehicle is left in READY
state (vehicle running) with shifter in PARK for
30 minutes, it will automatically turn off the
vehicle. Notifications have been designed into
this feature to raise awareness of the timed
event. The instrument cluster display will
display “Ready to Drive” accompanied with
three audible chimes while exiting. The interior
warnings will occur regardless if the key fob
remains in the vehicle or is removed. The horn
will sound three times if the fob is removed from
the vehicle and the ignition state is in READY
mode. To restart the vehicle, follow the normal
process for starting your vehicle.
The Keyless Push Button Ignition has several
operating modes that are labeled and will
illuminate when in position. These modes are
OFF, ACC, RUN, and START.
NOTE:
Pushing the START/STOP ignition button may
only activate the Electric Propulsion system
and not start the vehicle’s engine (if running
the engine is not currently required by the
Hybrid system). READY will show in instru
-
ment cluster display whenever the vehicle is
operating in Electric-only (EV) mode and the
vehicle is stationary.
If the vehicle’s ignition is in either ACC or
RUN, the vehicle charge indicator may not
display a value greater than 99% state of
charge due to vehicle loads.
2
21_JL_H_SU_EN_USC_t.book Page 25