GETTING TO KNOW YOUR VEHICLE
9
HIGH VOLTAGE CHARGING OPERATION
SAE J1772 C
HARGING
I
NLET
Your vehicle uses an industry standard SAE
J1772 charge inlet (vehicle charge inlet) for
both AC Level 1 (120 V) and AC Level 2 (240 V)
charging.
Vehicle Charge Inlet Location
AC L
EVEL
1 C
HARGING
(120 V
OLT
,
15 A
MP
)
Your vehicle is equipped with a 120 Volt AC, SAE
J1772 Level 1 Electric Vehicle Supply Equipment
(EVSE), also referred to as a Portable Charging
Cordset. AC Level 1 charging requires a
conventional NEMA 5-15R 120 Volt AC grounded
wall receptacle along with the EVSE provided with
the vehicle.
Portable Charging Cordset (EVSE)
The EVSE is stored in the rear cargo area below
the load floor. To access this area, lift up the
cargo strap of the load floor cover, and remove
the EVSE from the storage bag in the bin below.
WARNING!
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE OR ELECTRIC SHOCK: Shock, fire,
property damage, or personal injury may
occur if the Portable Charging Cordset (EVSE)
is not used properly. There are no serviceable
parts contained in the Portable Charging
Cordset (EVSE). Any attempt to service it may
result in shock, fire, property damage, or
personal injury.
2
21_JL_H_SU_EN_USC_t.book Page 9