Jeep WRANGLER 2021 Page 85 Owner'S Manual Download

Page: 85 / 464

GETTING TO KNOW YOUR VEHICLE

4. Line up the rear window to the right side

quarter window first, and engage the plastic

retainers.

5. Repeat with the left side quarter window.

Step Five

6. Engage the rear window retainers in the

lower right and left corners.

Step Six

NOTE:

For information on removing your soft top, refer

to the next section.

EMOVING

OFT

Use this QR code to access your

digital experience.

1. Fully lower the soft top

page 78.

2. Make sure the lift assist mechanism on

both the left and right sides are in the “lock”

position, and an audible “click” is heard

when pushing down on the #1 bow from

each of the lift assist mechanisms before

removing.

Step Two

CAUTION!

Failure to follow the next steps could result in

damage to the Soft Top or vehicle.

21_JL_OM_EN_USC_t.book Page 83

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands