Jeep WRANGLER 2021 Page 82 Owner'S Manual Download

Page: 82 / 464

GETTING TO KNOW YOUR VEHICLE

AISING

OFT

Use this QR code to access your

digital experience.

Raising The Soft Top From The Fully Lowered

Position
1. From the fully lowered position, remove

straps if previously secured.

2. While pushing down on the rear of the top,

slide the lock lever on the left and right side

lift assist mechanisms to the “unlock”

position.

Step Two

3. Push up and forward from the #5 Bow along

the guide track until it locks into the

Sunrider® position with an audible “click”.

Step Three

4. Gently pull rearward on the #6 Bow to

ensure the top is locked in the Sunrider®

position.

5. Using the side link, lift and push the soft top

toward the front of the vehicle manually

guiding the top into the closed position.

Step Five

CAUTION!

Failure to follow the next steps could result in

damage to the Soft Top or vehicle.

1 — Unlocked Position
2 — #5 Bow Location

21_JL_OM_EN_USC_t.book Page 80

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands