Jeep WRANGLER 2021 Page 52 Owner'S Manual Download

Page: 52 / 464

GETTING TO KNOW YOUR VEHICLE

IGH

EAM

WITCH

Push the multifunction lever toward the

instrument panel to switch the headlights to

high beams. The lever will return to the centered

position. To return the headlights to low beam,

pull the lever toward the steering wheel, or push

the lever toward the instrument panel.

Multifunction Lever

UTOMATIC

IGH

EAM

EADLAMP

ONTROL

— I

QUIPPED

The Automatic High Beam Headlamp Control

system provides increased forward lighting at

night by automatically controlling the high

beams through the use of a camera mounted

on the vehicle’s header. This camera detects

vehicle specific light and automatically switches

from high beams to low beams until the

approaching vehicle is out of view.

NOTE:



The Automatic High Beam Headlamp Control

can be turned on or off by selecting “ON”

under “Auto High Beam” within your

Uconnect Settings

page 211, as well as

turning the headlight switch to the AUTO posi

tion and placing the multifunction lever in the

high beam position.



Broken, muddy, or obstructed headlights and

taillights of vehicles in the field of view will

cause headlights to remain on longer (closer

to the vehicle). Also, dirt, film, and other

obstructions on the windshield or camera

lens will cause the system to function improp

erly.

LASH

-T

-P

ASS

You can signal another vehicle with your

headlights by lightly pulling the multifunction

lever toward you. This will cause the high beam

headlights to turn on, and remain on, until the

lever is released.

UTOMATIC

EADLIGHTS

— I

QUIPPED

This system automatically turns the headlights

on or off according to ambient light levels. To

turn the system on, rotate the headlight switch

clockwise to the last detent for automatic

headlight operation. When the system is on, the

headlight time delay feature is also on. This

means the headlights will stay on for up to

90 seconds after you place the ignition into the

OFF position. To turn the automatic system off,

move the headlight switch out of the AUTO

position.

NOTE:

The engine must be running before the head

lights will come on in the automatic mode.

IGHTS

-O

EMINDER

If the headlights, parking lights, or cargo lights

are left on after the ignition is placed in the OFF

position, a chime will sound when the driver’s

door is opened.

21_JL_OM_EN_USC_t.book Page 50

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands