Jeep WRANGLER 2021 Page 273 Owner'S Manual Download

Page: 273 / 464

MULTIMEDIA

271

Use one of these three ways to purchase a

subscription to the 4G Wi-Fi Hotspot:
1. From your vehicle’s touchscreen, select

the 4G Wi-Fi Hotspot App, and press the

How To Purchase button and follow the

instructions.

2. Log onto your Owner’s Site and click the link

to the AT&T portal to get set up.

3. For existing Connected Car customers:

Press the ASSIST button to be routed to an

AT&T Customer Care agent who will assist

you.

Once the 4G Wi-Fi Hotspot is purchased, you

can change its name and the password by

selecting the Wi-Fi Hotspot App and pressing

the Setup Wi-Fi Hotspot button. You can also

view the connected devices from the app

screen by pressing the View Connected Devices

button.

NOTE:

A SiriusXM Guardian™ subscription is not

required in order to purchase and use the 4G

Wi-Fi Hotspot.

Stolen Vehicle Assistance

Description
If your vehicle is stolen, the SiriusXM Guardian™

Customer Care agent may be able to locate the

stolen vehicle and work with law enforcement to

help recover it.
How It Works
1. If your vehicle is stolen, contact local law

enforcement as soon as possible. They will

work with you to file a stolen vehicle report.

2. Next, inform SiriusXM Guardian™ Customer

Care that your vehicle has been stolen.

The SiriusXM Guardian™ Customer Care

Agent will ask for the stolen vehicle report

number (as issued by your local law enforce

ment). If you have downloaded the

Uconnect App, you can push the “Settings”

menu button on your device, select “Help”,

and then select “SiriusXM Guardian™ Cus

tomer Care” to make the call.

3. SiriusXM Guardian™ Customer Care will

authenticate that you are the owner of the

vehicle and contact the law enforcement

with whom you filed the stolen vehicle

report.

4. SiriusXM Guardian™ Customer Care will

work with your local law enforcement to

locate the vehicle. You will be contacted by

law enforcement if your vehicle is

recovered. While the investigation is

ongoing, you should also contact your

insurance company to inform it of the

situation.

WARNING!

Always drive safely with your hands on the

steering wheel and obey all applicable laws.

You have full responsibility and assume all

risks related to the use of the features and

applications in this vehicle. Only use the fea

tures and applications in this vehicle when it

is safe to do so. Failure to comply may result

in an accident involving in serious injury or

death.

21_JL_OM_EN_USC_t.book Page 271

Summary of Contents for WRANGLER 2021

















































































































































































































































































































































































































































































Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands

Jeep WRANGLER 2021, Owner'S Manual

Search results

Summary of Contents for WRANGLER 2021

Reviews:

Related manuals for WRANGLER 2021

Brands by name

Popular brands