TEST
ACTION
APPLICABILITY
3
Turn the ignition off.
Disconnect the Adjustable Pedals Motor/Sensor harness connector.
Disconnect the Adjustable Pedals Module harness connector.
Note: Check connector - Clean/repair as necessary.
Turn the ignition on.
Check the Sense circuit for a short to battery and for a short to the Sensor Feed
circuit.
Is the Sense circuit shorted?
All
Yes
→
Repair the Sense circuit for a short to battery or to the Sensor
Feed circuit.
Perform ADJUSTABLE PEDALS VERIFICATION TEST - VER
1.
No
→
Replace and program the Adjustable Pedals Module in accordance
with the Service Information..
Perform ADJUSTABLE PEDALS VERIFICATION TEST - VER
1.
4
Turn the ignition off.
Visually inspect the related wiring harness. Look for any chafed, pierced, pinched, or
partially broken wires.
Visually inspect the related wire harness connectors. Look for broken, bent, pushed
out, or corroded terminals.
Refer to any Hotline letters or Technical Service Bulletins that may apply.
Were any problems found?
All
Yes
→
Repair as necessary.
Perform ADJUSTABLE PEDALS VERIFICATION TEST - VER
1.
No
→
Test Complete.
11
ADJUSTABLE PEDALS
PEDAL SENSOR OPEN/SHORTED TO BATTERY —
Continued
