Jeep RENEGADE 2017, User Manual, Page: 55 / 332

WINDOWS
Power Window Controls
The power window switch is located on the
driver’s door panel. The driver’s power window
switch controls the operation of all the windows.
There are single window controls on each
passenger door trim panel, which operate the
passenger door windows. The window con-
trols will operate only when the ignition is in
the ON or RUN position.
NOTE:
For vehicles equipped with Uconnect, the
power window switches will remain active for
up to three minutes after the ignition is
cycled to the OFF position. Opening either
front door will cancel this feature. Refer to
“Uconnect Settings” in “Multimedia” in your
“Owner’s Manual” on
www.jeep.com/en/owners/manuals for further
information.
WARNING!
Never leave children unattended in a ve-
hicle, and do not let children play with
power windows. Do not leave the key fob in
or near the vehicle, or in a location acces-
sible to children, and do not leave the
ignition of a vehicle equipped with Keyless
Enter-N-Go in the ACC or ON/RUN mode.
Occupants, particularly unattended chil-
WARNING!
dren, can become entrapped by the win-
dows while operating the power window
switches. Such entrapment may result in
serious injury or death.
Auto-Down Feature
The driver door power window switch and the
passenger door power window switches have
an Auto-Down feature. Push the window
switch down, for a short period of time, and
release and the window will go down auto-
matically.
To open the window part way, push the win-
dow switch down briefly and release it when
you want the window to stop.
To stop the window from going all the way
down during the Auto-Down operation, pull
up on the switch briefly.
Power Window Switches
1 — Window Lockout Switch (Rear Doors)
2 — Opening/Closing Left/Right Rear
Window (If Equipped)
3 — Opening/Closing Left/Right Front
Window
53