Jeep RENEGADE 2017, User Manual, Page: 48 / 332

Icon Description
MAX Defrost Button
Push the MAX Defrost button to change the current airflow setting to Defrost mode. The indicator illuminates when this
feature is on. Performing this function will cause the automatic climate controls to change to manual mode. The blower
speed increases to full (all LEDs on) when MAX Defrost mode is selected, the air conditioning compressor is turned on
(LED on), both driver and passenger temperature controls are set to (HI), defrost mode is selected (LED on), rear de-
froster is turned on (LED on) and the air recirculation is turned off (LED off). If the MAX Defrost mode is turned off, the
climate system will return to the previous setting.
Rear Defrost Button
Push the Rear Defrost button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indi-
cator will illuminate when the rear window defroster is on. The rear window defroster automatically turns OFF after
20 minutes.
Passenger Temperature Knob
Provides the passenger with independent temperature control. Rotate the adjustment knob to set desired temperature
shown in the Temperature Display. The set temperature is shown on the display. Turning the control knob completely in
one direction or the other activates the HI (maximum heating) or LO (maximum cooling) functions shown in the display,
respectively. To deactivate these functions, turn the temperature knob to the desired temperature.
NOTE:
Rotating the Passenger Temperature Control knob while in Sync mode will automatically exit Sync.
Blower Control Knob
Blower control is used to regulate the amount of air forced through the climate system. Adjusting the blower will cause
the automatic mode to change to manual operation. The speeds can be selected by rotating the Blower Control adjust-
ment knob.
GETTING
TO
KNOW
YOUR
VEHICLE
46