Home
/
Jeep
/
Liberty 2011
/
Owner'S Manual

Jeep Liberty 2011, Owner'S Manual, Page: 152 / 540

Share

Page: 152 / 540

Jeep Liberty 2011 Owner'S Manual Download Page 152

2. Pull the release strap (toward the front of the vehicle).

3. Fold the rear seat completely forward.

4. If desired, push down on the seatback to lock it in the
folded position.

To Raise The Rear Seat

NOTE:

If interference from the cargo area prevents the

seatback from fully locking, you will have difficulty
returning the seat to its proper position.

1. If locked in the folded position, pull the release strap
(toward the front of the vehicle).

2. Raise the seatback and lock it into place.

WARNING!

Be certain that the seatback is securely locked into
position. If the seatback is not securely locked into
position the seat will not provide the proper stability
for child seats and/or passengers. An improperly
latched seat could cause serious injury.

Rear Seat Release Strap

150

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
150
151
152
153
154
...
»

Summary of Contents for Liberty 2011





























































































































































































































































































































































































































































































































































Reviews:

No comments