Jeep Liberty 2007, Owner'S Manual, Page: 87 / 417

Headset Profile), you may not be able to use any UCon-
nect™ features. Refer to your cellular service provider or
the phone manufacturer for details.
The UConnect™ system is fully integrated with the
vehicle’s audio system. The volume of the UConnect™
system can be adjusted either from the radio volume
control knob, or from the steering wheel radio control
(right switch), if so equipped.
The radio display will be used for visual prompts from
the UConnect™ system such as
⬙
CELL
⬙
or caller ID on
certain radios.
Operations
Voice commands can be used to operate the UConnect™
system and to navigate through the UConnect™ menu
structure. Voice commands are required after most
UConnect™ system prompts. You will be prompted for a
specific command and then guided through the available
options.
•
Prior to giving a voice command, one must wait for
the voice on beep, which follows the
⬙
Ready
⬙
prompt
or another prompt.
•
For certain operations, compound commands can be
used. For example, instead of saying
⬙
Setup
⬙
and then
⬙
Phone Pairing,
⬙
the following compound command
can be said:
⬙
Setup Phone Pairing.
⬙
•
For each feature explanation in this section, only the
combined form of the voice command is given. You
can also break the commands into parts and say each
part of the command, when you are asked for it. For
example, you can use the combined form voice com-
mand
⬙
Phonebook New Entry,
⬙
or you can break the
combined form command into two voice commands:
⬙
Phonebook
⬙
and
⬙
New Entry.
⬙
Please remember, the
UConnect™ system works best when you talk in a
normal conversational tone, as if speaking to some one
sitting eight feet away from you.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87
3